2019 Sabre 48 Fly Bridge

Designed with our experienced and adventurous owners in mind, the Sabre 48 Fly Bridge is the perfect combination of the traditional Downeast style and the wind-in-your-hair freedom of a fly bridge. Nautically sensible design choices preserve the living space inside the pilothouse, meaning our owners do not have to compromise between their indoor and outdoor experience.

The Sabre 48 Fly Bridge offers unparalleled views, providing unrestricted sightlines while underway and clear views of your surroundings while docking. An endearing space for al fresco dining and entertainment, with the full power and control of a traditional helm including joystick controls, makes the 48 Fly Bridge a practical and elegant addition to our successful Salon Express series. The expertly designed stairs leading from the cockpit to the bridge provide security during ascent and descent with full steps and handholds everywhere they are needed.

Basic Boat Info

Make: Sabre
Model: 48 Fly Bridge
Year: 2019
Category: Power
Designer: Sabre Design Team
Construction: Fiberglass

Dimensions

Length: 47'6 ft
Length Overall: 52'3 ft
Beam: 15'4 ft
Max Draft: 4'1 ft
Bridge Clearance: 22'3 ft
Dry Weight: 39,500 lb
Deadrise: 14 °
Single Berths: 6

Engines / Speed

Engines: 2
Engine #1 Specs:
  • Make: Cummins
  • Model: QSC 8.3
  • Engine Power: 600hp
  • Type: Inboard
Engine #2 Specs:
  • Make: Cummins
  • Model: QSC 8.3
  • Engine Power: 600hp
  • Type: Inboard

Tanks

Fuel Tanks: 1
Fuel Tank Capacity: 525 gal
Water Tanks: 1
Water Tank Capacity: 160 gal
Holding Tank Count: 1
Holding Tank Capacity: 70 gal

Other

Boat Class: Flybridge, Motor Yachts
More Info : Manufacturer Website
Hull
  • Modified Deep “V” Planing hull design, with shallow pod drive tunnels.
  • 14º deadrise at transom, 23º deadrise amidships.
  • ISO NPG white gelcoat w/vinylester back-up resin.
  • Bottom, topsides and transom VIP resin infused biaxial E-glass with Corecell SAN foam core.
  • Stringer system biaxial E-glass with foam core.
  • Resin Infused E-glass swim platform with molded-in anti-skid surface.
  • Hull side rubbing strakes.
  • PVC rub rail with stainless steel cap.
  • Painted (Urethane) double boot top.
  • Gold recessed cove stripe.
Deck
  • ISO NPG gelcoat.
  • VIP resin infused biaxial E-glass with balsa core.
  • Molded-in anti-skid deck surfaces.
  • Companionway door to port.
  • Sliding windows in salon on cabin sides.
  • Electric opening window in salon aft bulkhead.
  • Hinged access door to side deck at helm.
  • Flush, outward opening, transom door with latch.
  • Anchor locker with slam latch.
  • Large lazarette/engine room access hatch in cockpit sole with compression latches.
  • Sure Shade system over cockpit
Fly Bridge
  • Stainless steel staircase with composite treads turning through 90 degrees
  • Venturi windscreen
  • Stidd FB helm chair
  • Large U-shaped settee to port with storage under
  • Large folding teak table with sea rail below
  • Cummins/Zeus engine controls including joystick
  • Large panel for Navigational Electronics
  • AC/DC refrigerator below fwd settee seat
  • Optional second Stidd chair
  • Optional radar mast
Helm
  • Cummins DTS single lever electronic controls.
  • Cummins Smart Craft display (engine data, tank levels, vessel data, alarms).
  • Triple windshield wipers with washers.
  • Ritchie Compass.
  • Switch controls for horn, running lights, anchor light, engine room blower and optional equipment.
  • Stazo 400mm custom teak steering wheel with tilt helm and Sabre logo.
  • (2) Stidd N Series helm seats with Ultraleather fabric mounted on a cherry cabinet
  • NMEA backbone
Galley
  • Solid surface galley counter top.
  • Stainless steel under mount sink with cover and pull-out faucet
  • Stainless steel under mount prep sink with cover.
  • Soap dispenser
  • Isotherm stainless steel stand-up refrigerator (top) and freezer
  • Two burner electric cook top.
  • Convection microwave with stainless steel face
  • Drawers and storage lockers below counter.
  • Built-in waste basket. Recycle bin below steps.
Master Stateroom
  • Spacious island berth athwartship layout with laminated trim.
  • Hull side deadlight over head board
  • Shoji style passageway and closet doors
  • Shoji style portlight screen panels
  • Cherry hull ceilings.
  • Drawers under berth and in bulkhead aft of berth.
  • (2) hanging lockers fore and aft of bed.
  • Teak and holly sole.
  • Sound deadening soft headliner panels.
  • Sliding door to master head compartment
Guest Stateroom
  • Spacious island berth, with laminated trim.
  • Cherry hull ceilings.
  • Drawers under berth, A/C return grille beside.
  • Storage lockers, drawers and shelves.
  • Teak and holly sole.
  • Sound deadening soft headliner panels.
  • Pocket door to passageway.
  • Private access to forward head and shower
  • Stainless steel under mount sink.
  • Shower stall with seat and locker outboard.
  • Hot and cold pressure water
  • Electric shower sump pump.
  • Storage lockers.
  • Solid surface vanity top with bull nose.
  • Towel bars
  • Soap dispenser

Contact Us


More From Sabre


2019 Sabre 38 Salon Express
2019 Sabre 42 Salon Express
2019 Sabre 45 Salon Express
2019 Sabre 42 Fly Bridge
2019 Sabre 48 Salon Express